Green Eagle
New build, remodel, or commercial project just wrapped? Green Eagle Pressure Washing LLC removes red clay, drywall dust, mortar, paint overspray, and every trace of the jobsite — so your finished property is move-in ready. Serving Raleigh, Cary, Apex, Garner, Clayton, and the rest of the Triangle.
"I had a great experience with Green Eagle. I had to reschedule and they were very understanding and prompt with a new date and time. Gutter team did an amazing job. My house and shed looked good as new!"
"Green Eagle Pressure Washing was GREAT! Fast communication, reasonable estimate, fast appointment, on time, and the finished product was better than expected! The staff is SUPER NICE too!"
"Jonathan was a delight to work with - very personable and professional. He returned my call quickly, provided options for pricing, and exceeded my expectations. Highly recommend!"
"Incredible job on my driveway - looked brand new! They were fast, professional, and the price was very fair. Highly recommend Green Eagle to anyone in the Apex area."
"Fast service and very professional crew. My fence and deck look amazing now. Will definitely be using Green Eagle again for our yearly maintenance!"
"Our siding looks brand new. They took the time to explain the soft wash process and even cleaned a few extra spots we didn't ask about. Best service experience I've had!"
Located in Raleigh, NC. We travel to all surrounding cities within 40 miles.
New construction in the Triangle leaves behind more than scraps. Red clay bakes onto concrete. Drywall dust cakes onto stucco and brick. Mortar splatter hardens on pavers. Paint overspray settles on glass and siding. A punch-list cleanup with a hose won't touch it — and the wrong pressure will permanently damage new finishes. Green Eagle Pressure Washing LLC is the post-construction partner that gets it off without damaging what's under it.
We coordinate directly with builders, GCs, and property managers. Walk the site with us or send photos — we'll quote, schedule within the week, and document each surface cleaned.
We identify every surface that needs attention, flag anything delicate (new stucco, pre-finished wood, low-E glass), and lock a timeline.
Surface cleaners at 3,500 PSI for hardscape. Soft-wash (under 500 PSI) with detergents for stucco, siding, and stone. Never one-size-fits-all.
New landscaping, light fixtures, HVAC units, and exposed wiring get covered before we touch a trigger. Waste water is controlled — never a muddy mess for the next crew.
Red clay, mortar, and thinset come off. Surface cleaners leave zero stripe marks. Pavers are rinsed and polymeric sand is respected.
Stucco, brick, fiber cement, vinyl, Hardie, LP SmartSide — each handled at its own safe pressure with the right detergent so no finish is etched, streaked, or waterlogged.
We document before/after for your files and the homeowner. Any callback within 7 days is free.
Practical info from actual jobsites across Raleigh, Cary, Apex, and Clayton. Written by the Green Eagle crew.
Iron oxide in red Piedmont soil doesn't just rinse off concrete — it chemically bonds with cement paste during drying cycles. We cover why a hot-water surface cleaner plus the right pre-treatment is the only thing that actually lifts it.
Inside this article →New stucco cured under 60 days is vulnerable. Fiber cement siding (Hardie) has a factory-primed face that 3,000+ PSI will erode in seconds. This is how we match pressure and flow to each substrate without a single streak.
Inside this article →Razor-blading glass is faster but scratches low-E coatings. We walk through the chemical-first method we use that dissolves latex and oil-based overspray with zero mechanical abrasion.
Inside this article →Muriatic acid eats mortar — and the calcium in limestone, brick face, and concrete under it. We explain the buffered acid blend + neutralizer workflow we use instead.
Inside this article →Joint compound dust is gypsum — it rehydrates. Without a surfactant-forward pre-soak it smears instead of rinsing. Here's the two-step prep we use on every new-build exterior.
Inside this article →NPDES runoff rules still apply to the final cleanup. Our rigs recover detergent-heavy water so the rinse staying on your site stays clean.
Inside this article →As soon as the last trade is out. We prefer to be the final vendor before the final walkthrough so nothing re-dirties the surfaces. We can schedule within the same week in most cases.
Not the way we do it. New stucco under 60 days and freshly painted surfaces get the soft-wash treatment — under 500 PSI with a detergent-forward mix that lifts construction debris without eroding the finish. High pressure only goes to hardscape surfaces built to take it.
Yes. Red clay is our daily reality in the Triangle. We use a surface cleaner running at 3,500+ PSI with heated water and an iron-remover pre-treatment. It pulls the red out of concrete instead of just smearing it.
Restaurants, multi-family, office, retail, and industrial. We've cleaned up behind GCs across Wake, Johnston, and Durham counties. Certificate of insurance is available on request.
It scales with square footage and complexity. A single-family new build usually lands between $600 and $1,800 depending on hardscape, siding type, and whether we're doing windows. For commercial projects we walk the site and quote in writing within 24 hours.
Yes — we prefer it. We'll invoice the GC on net-30 terms and coordinate with your superintendent. We document every surface cleaned with before/after photos so it closes cleanly on the punch list.
Raleigh, Cary, Apex, Garner, Clayton, Wake Forest, Holly Springs, Fuquay-Varina, Knightdale, Morrisville, and the rest of the Triangle. Call us and we'll tell you if we've run a job on your street before.
New build, remodel, or commercial site? Send the scope, the address, and your timeline. We'll reply with a quote and schedule the cleanup around your punch-list date. No auto-responders — a real person on the Green Eagle crew reads every message.
We typically reply within 1 hour